If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Powercurve
Results 1 to 2 of 2
  1. #1
    Authorized Vendor SPeace-ATL's Avatar
    Join Date
    Jul 2011
    Location
    Atlanta, GA
    Posts
    363

    Default Pro-Force offers "Built" TR3650's too!

    Since this is primarily a Fox Body site I haven't said much about the newer model transmissions, but Pro-Force builds about as many TR3650's as we do T-5's.

    Our reputation is growing with customers all over the country.
    Hmm, yes, we've even shipped a few transmissions OUT of the country!

    The weakest spot in a TR3650 is the input shaft. Apply too much torque and they just SHEAR OFF!
    Our "Pro-Force PRO" TR-3650 takes care of that with a 26 spline input shaft made in the USA out of 9310 alloy steel.

    For a step up, we also offer the "Pro-Force PRO-C" with Cryogen Tempered gears, forks and synchro sliders.
    The "PRO-C" is rated at an estimated 600 ft/lbs of torque!

    We also build the TR3550, the TKO series, the T-56, and the T-45.

    Stan
    Last edited by SPeace-ATL; 02-26-2013 at 09:32 AM.
    - Stan -


    Mustang 5-Speed Specialists - Authorized Distributor for Astro Performance products!
    Offering quality rebuilt T-5, T-45, and TR3650 transmissions in Atlanta

  2. #2
    Authorized Vendor SPeace-ATL's Avatar
    Join Date
    Jul 2011
    Location
    Atlanta, GA
    Posts
    363

    Default

    TR3650 Input Shaft Carnage!
    PA232095c.jpg
    - Stan -


    Mustang 5-Speed Specialists - Authorized Distributor for Astro Performance products!
    Offering quality rebuilt T-5, T-45, and TR3650 transmissions in Atlanta

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •